Welcome to 386 Fab!

21 of 21 Items
  • 5/8 ROD END KIT

    5/8 ROD END KIT

    5/8 Rod End Kit This is our 5/8" Rod end set, comes as a single rod end, with a tube adapter for either 3/4" or 1" ID tubing, as well as a jam nut and spacers of your choice. With spacers, the mount width of this 5/8" rod end is 1.5" and is available for...

    $33.00
  • 7/8" X 3/4" ROD END SET

    7/8" X 3/4" ROD END SET

    7/8" x 3/4" Rod End Set This is it, a pair of 7/8" x 3/4" Heat Treated Chromoly Rod Ends with all the trimmings! You get two 7/8" Heims with a 3/4" through bore, 4 stainless misalignment spacers with 34 degrees of misalignment, a pair of zinc plated jam...

    $75.00
  • 5/8" STAINLESS STEEL SPACER 5/8" STAINLESS STEEL SPACER 5/8" STAINLESS STEEL SPACER

    5/8" STAINLESS STEEL SPACER

    5/8" Stainless Steel Spacer These are made for those times when you just don't want to size the bolt down any further. They do not increase your misalignment angle but the 5/8" Heim joint has 22 degrees from the factory. So if you need the mounting space...

    $3.75
  • 5/8" STAINLESS MISALIGNMENT 5/8"-1/2" 5/8" STAINLESS MISALIGNMENT 5/8"-1/2"

    5/8" STAINLESS MISALIGNMENT 5/8"-1/2"

    5/8" to 1/2" Stainless Misalignment Misalignments allow additional room for the heim joint to pivot, that comes simply from the shape of the misalignment. Another function of misalignment is to serve as a spacer and reducer, this allows the use of a...

    $5.25
  • 3/4" X 5/8" ROD END LEFT HAND THREAD 3/4" X 5/8" ROD END LEFT HAND THREAD

    3/4" X 5/8" ROD END LEFT HAND THREAD

    With all the Heim Joints we sell it only made sense to make them the way we wanted them... This is a 3/4"" shaft with a 5/8"" bore (16TPI). Don't let the price confuse you, these are a very high quality Heat Treated 4130 Chromoly rod end, we can sell...

    $19.95
  • 3/4 X 5/8 ROD END KIT

    3/4 X 5/8 ROD END KIT

    KIT INCLUDES: 1--3/4" X 5/8" Bore Heat Treated Chromoly Heims 1--3/4" Tube Adapters (1" Tube ID) 1--3/4" Jam Nuts 2--Misalignment Spacers (For 1.5" ID brackets) 3/4" x 5/8" Heat Treated Chromoly Rod End with all the trimmings! You get your choice of...

    $37.40
  • 3/4"-16 RH HEX TUBE ADAPTER, 1" TUBE ID

    3/4"-16 RH HEX TUBE ADAPTER, 1" TUBE ID

    This is a 3/4" RH HEX Head Weld in Threaded Bung made for 1" ID Tube, the HEX head makes adjustment easy! They are sold individually but we can fit a ton of them in a small flat rate box! *Tips to help prevent any seized or warped threads:Correctly...

    $8.50
  • 3/4"-16 LH HEX TUBE ADAPTER, 1" TUBE ID

    3/4"-16 LH HEX TUBE ADAPTER, 1" TUBE ID

    This is a 3/4" LH HEX Head Weld in Threaded Bung made for 1" ID Tube, the HEX head makes adjustment easy! They are sold individually but we can fit a ton of them in a small flat rate box! *Tips to help prevent any seized or warped threads:Correctly...

    $8.50
  • 3/4" TO 9/16" WIDE STAINLESS MISALIGNMENT

    3/4" TO 9/16" WIDE STAINLESS MISALIGNMENT

    3/4" to 9/16" Wide Stainless Misalignment These Misaligment pieces are what I see as a step in a ladder. They fit a 7/8"x3/4" or 3/4" heim joint that is being used in a 2 5/8" wide bracket. They may be used with the smaller rod end to fill a gap usually...

    $7.10
  • 3/4" TO 9/16" STAINLESS MISALIGNMENT

    3/4" TO 9/16" STAINLESS MISALIGNMENT

    3/4" to 9/16" Stainless Misalignment Missalignment does 2 things necessary to run Rod Ends on a 3 or 4 Link Suspension. The first and most important is allow additional room for the joint to pivot and let your suspension articulate, that comes simply...

    $6.15
  • 3/4" TO 5/8" WIDE STAINLESS MISALIGNMENT

    3/4" TO 5/8" WIDE STAINLESS MISALIGNMENT

    3/4" to 5/8" Wide Stainless Misalignment These Misaligment pieces are what I see as a step in a ladder. They fit a 7/8"x3/4" or 3/4" heim joint that is being used in a 2 5/8" wide bracket. They may be used with the smaller rod end to fill a gap usually...

    $7.10
  • 3/4" TO 5/8" STAINLESS MISALIGNMENT

    3/4" TO 5/8" STAINLESS MISALIGNMENT

    3/4" to 5/8" Stainless Misalignment Missalignment does 2 things necessary to run Rod Ends on a 3 or 4 Link Suspension. The first and most important is allow additional room for the joint to pivot and let your suspension articulate, that comes simply from...

    $6.15
  • 3/4" TO 5/8" SAFETY STAINLESS MISALIGNMENT

    3/4" TO 5/8" SAFETY STAINLESS MISALIGNMENT

    3/4" to 5/8" Safety Stainless Misalignment Not Safety Washers & not Standard High Misalignment. I was looking to add Safety Washers to our line up but something kept bugging me, wouldn't the mating surface between the High Misalignment and the Safety...

    $8.25
  • 3/4" TO 5/8" NARROW STAINLESS MISALIGNMENT 3/4" TO 5/8" NARROW STAINLESS MISALIGNMENT

    3/4" TO 5/8" NARROW STAINLESS MISALIGNMENT

    3/4" to 5/8" Narrow Stainless Misalignment These came about when we decided to get rid of the steering washers used in our heim tie rod kits. We wanted to use misalignment's but with a narrow mounting distance to keep the heim close to it's mount and the...

    $7.75
  • 3/4" TO 1/2" STAINLESS MISALIGNMENT

    3/4" TO 1/2" STAINLESS MISALIGNMENT

    3/4" to 1/2" Stainless Misalignment Missalignment does 2 things necessary to run Rod Ends on a 3 or 4 Link Suspension. The first and most important is allow additional room for the joint to pivot and let your suspension articulate, that comes simply from...

    $6.15
  • 3/4" JAM NUT RIGHT HAND THREAD

    3/4" JAM NUT RIGHT HAND THREAD

    This is a 3/4" Hex Jam Nut, right hand thread with 16 threads per inch.Sold Individually. 3/4 Jam Nut Hex Nut Zinc Plated Thin Nut Low Profile These will fit our 3/4 Cromoly Heim Joints!

    $2.00
  • 3/4" JAM NUT LEFT HAND THREAD

    3/4" JAM NUT LEFT HAND THREAD

    This is a 3/4" Hex Jam Nut, left hand thread with 16 threads per inch.Sold Individually. 3/4 Jam Nut Hex Nut Zinc Plated Thin Nut Low Profile These will fit our 3/4 Cromoly Heim Joints!

    $2.00
  • 3/4 STAINLESS STEEL SPACER 3/4 STAINLESS STEEL SPACER

    3/4 STAINLESS STEEL SPACER

    This spacer has a 3/4" bore and has a mounting width of 2". These would be good to use with our panhard brackets if you want to run a larger bolt but don't need the additional misalignment. The 3/4" Heim has 22 degrees from the factory. SOLD...

    $3.95
  • 3/4" ROD END LEFT HAND 16(TPI) 3/4" ROD END LEFT HAND 16(TPI)

    3/4" ROD END LEFT HAND 16(TPI)

    With all the Heim Joints we sell it only made sense to make them the way we wanted them... This is a 3/4"" shaft with a 3/4"" bore (16TPI). Don't let the price confuse you, these are a very high quality Heat Treated 4130 Chromoly rod end, we can sell...

    $18.25
  • 3/4" Rod End Right Hand 16(tpi) 3/4" Rod End Right Hand 16(tpi)

    3/4" Rod End Right Hand 16(tpi)

    With all the Heim Joints we sell it only made sense to make them the way we wanted them... This is a 3/4" shaft with a 3/4" bore (16TPI). Don't let the price confuse you, these are a very high quality Heat Treated 4130 Chromoly rod end, we can sell them...

    $18.25
  • 3/4" Rod End Set 1" Tube ID

    3/4" Rod End Set 1" Tube ID

    KIT INCLUDES: 2 - 3/4" X 3/4" Bore Heat Treated Chromoly Heims 2 - 3/4" Tube Adapters (1" Tube ID) 2 - 3/4" Jam Nuts 4--Misalignment Spacers (For 2" ID brackets) This is it, the Left and Right hand set of 3/4" x 3/4" Heat Treated Chromoly Rod Ends with...

    $65.00 - $67.00
21 of 21 Items