Welcome to 386 Fab!

13 of 13 Items
  • 3/4"-16 RH HEX TUBE ADAPTER, 1" TUBE ID

    3/4"-16 RH HEX TUBE ADAPTER, 1" TUBE ID

    This is a 3/4" RH HEX Head Weld in Threaded Bung made for 1" ID Tube, the HEX head makes adjustment easy! They are sold individually but we can fit a ton of them in a small flat rate box! *Tips to help prevent any seized or warped threads:Correctly...

    $10.95
  • 3/4"-16 LH HEX TUBE ADAPTER, 1" TUBE ID

    3/4"-16 LH HEX TUBE ADAPTER, 1" TUBE ID

    This is a 3/4" LH HEX Head Weld in Threaded Bung made for 1" ID Tube, the HEX head makes adjustment easy! They are sold individually but we can fit a ton of them in a small flat rate box! *Tips to help prevent any seized or warped threads:Correctly...

    $10.95
  • 3/4" TO 9/16" STAINLESS MISALIGNMENT

    3/4" TO 9/16" STAINLESS MISALIGNMENT

    3/4" to 9/16" Stainless Misalignment Missalignment does 2 things necessary to run Rod Ends on a 3 or 4 Link Suspension. The first and most important is allow additional room for the joint to pivot and let your suspension articulate, that comes simply...

    $9.95
  • 3/4" TO 5/8" WIDE STAINLESS MISALIGNMENT

    3/4" TO 5/8" WIDE STAINLESS MISALIGNMENT

    3/4" to 5/8" Wide Stainless Misalignment These Misaligment pieces are what I see as a step in a ladder. They fit a 7/8"x3/4" or 3/4" heim joint that is being used in a 2 5/8" wide bracket. They may be used with the smaller rod end to fill a gap usually...

    $10.95
  • 3/4" TO 5/8" STAINLESS MISALIGNMENT

    3/4" TO 5/8" STAINLESS MISALIGNMENT

    3/4" to 5/8" Stainless Misalignment Missalignment does 2 things necessary to run Rod Ends on a 3 or 4 Link Suspension. The first and most important is allow additional room for the joint to pivot and let your suspension articulate, that comes simply from...

    $9.95
  • 3/4" TO 5/8" SAFETY STAINLESS MISALIGNMENT

    3/4" TO 5/8" SAFETY STAINLESS MISALIGNMENT

    3/4" to 5/8" Safety Stainless Misalignment Not Safety Washers & not Standard High Misalignment. I was looking to add Safety Washers to our line up but something kept bugging me, wouldn't the mating surface between the High Misalignment and the Safety...

    $10.95
  • 3/4" TO 5/8" NARROW STAINLESS MISALIGNMENT 3/4" TO 5/8" NARROW STAINLESS MISALIGNMENT

    3/4" TO 5/8" NARROW STAINLESS MISALIGNMENT

    3/4" to 5/8" Narrow Stainless Misalignment These came about when we decided to get rid of the steering washers used in our heim tie rod kits. We wanted to use misalignment's but with a narrow mounting distance to keep the heim close to it's mount and the...

    $9.95
  • 3/4" TO 1/2" STAINLESS MISALIGNMENT

    3/4" TO 1/2" STAINLESS MISALIGNMENT

    3/4" to 1/2" Stainless Misalignment Missalignment does 2 things necessary to run Rod Ends on a 3 or 4 Link Suspension. The first and most important is allow additional room for the joint to pivot and let your suspension articulate, that comes simply from...

    $9.95
  • 3/4" JAM NUT RIGHT HAND THREAD

    3/4" JAM NUT RIGHT HAND THREAD

    This is a 3/4" Hex Jam Nut, right hand thread with 16 threads per inch.Sold Individually. 3/4 Jam Nut Hex Nut Zinc Plated Thin Nut Low Profile These will fit our 3/4 Cromoly Heim Joints!

    $3.95
  • 3/4" JAM NUT LEFT HAND THREAD

    3/4" JAM NUT LEFT HAND THREAD

    This is a 3/4" Hex Jam Nut, left hand thread with 16 threads per inch.Sold Individually. 3/4 Jam Nut Hex Nut Zinc Plated Thin Nut Low Profile These will fit our 3/4 Cromoly Heim Joints!

    $3.95
  • 3/4 STAINLESS STEEL SPACER 3/4 STAINLESS STEEL SPACER

    3/4 STAINLESS STEEL SPACER

    This spacer has a 3/4" bore and has a mounting width of 2". These would be good to use with our panhard brackets if you want to run a larger bolt but don't need the additional misalignment. The 3/4" Heim has 22 degrees from the factory. SOLD...

    $5.95
  • 3/4" ROD END LEFT HAND 16(TPI) 3/4" ROD END LEFT HAND 16(TPI)

    3/4" ROD END LEFT HAND 16(TPI)

    With all the Heim Joints we sell it only made sense to make them the way we wanted them... This is a 3/4"" shaft with a 3/4"" bore (16TPI). Don't let the price confuse you, these are a very high quality Heat Treated 4130 Chromoly rod end, we can sell...

    $21.95
  • 3/4" Rod End Right Hand 16(tpi) 3/4" Rod End Right Hand 16(tpi)

    3/4" Rod End Right Hand 16(tpi)

    With all the Heim Joints we sell it only made sense to make them the way we wanted them... This is a 3/4" shaft with a 3/4" bore (16TPI). Don't let the price confuse you, these are a very high quality Heat Treated 4130 Chromoly rod end, we can sell them...

    $21.95
13 of 13 Items