Welcome to 386 Fab!

COMEUP

SEAL GEN2 12.5rs, 12V WINCH

$1,395.95
SKU:
295795

Description

 

  • 12V DC severe duty winch rated at 12,500 lb pulling meets or exceeds your expectations.
  • Heavy duty series wound motor equipped with thermal switch alters when motor over-heating.
  • 4 equally positioned pin holes with a stainless steel ergonomic T-handle make it possible to clock in 90 degree Increments.
  • Water-proof remote control with thermometric LED indicator w/5 m cord
  • Tough aluminum die cast housings withstand strength of 2.0 x rated load of winch in foot forward mounting
  • The U.S. Germany, U.K. France, etc patented mechanical cone brake outside the drum expedites heat dispersion. The greater the load on the rope, the greater amount of braking is generated by the mechanism.
  • Meet SAE J706, CE Machinery Directive 2006/42/EC and CE Electromagnetic Compatibility Directive 2004/108/EC.

     

Specifications

Rated Line Pull 12,500 lbs (5,670 kg) single line
Motor 5.0 hp / 3,730 w 12V Series Wound
Gear Ratio 3-Stage Planetary 225:1
Clutch (freespooling) Rotating Ring Gear
Brake (outside the drum) Automatic, full load CBS (Cone Brake Structure)
Winch Construction Aluminum Die Cast Housing with Steel Drum
Drum Size 2.5" x 9" (63.5 x 228 mm)
Control Both built-in digital two way signal wireless remote control and waterproof remote with thermometric indicator LED w/17' (5 m) cord
Rope Type Synthetic Rope
Rope Size 7/16" x 82' (11 mm x 25 m)
Mounting Bolt Pattern 10" x 4.5" (254 x 114 mm)
Winch Weight 61.7 lb (28 kg)
Gross Weigh 89.1 lb (40.5 kg)
Warranty Limited lifetime warranty for mechanical components, three (3) year warranty for electrical components
Box Dimensions 26.9" x 8.2" x 16.9" (682 x 209 x 430 mm )
 

Line Speed and Amp. Draw (1st layer of rope on the drum):

Line Pull,
kg / lb
Line Speed,
mpm / fpm
Amp, Draw, A
12V
No load 7.7 / 25.3 45
907 / 2,000 3.4 / 11.2 75
1,814 / 4,000 2.5 / 8.2 160
2,722 / 6,000 2.0 / 6.6 230
3,629 / 8,000 1.7 / 5.6 300
5,670 / 12,500 0.9 / 3.0 470

Line Pull and Rope Capacity:

Layer of Rope Pull by layer, kg / lb
Total Rope on the Drum, m / ft
1st 5,670 / 12,500 4.8 / 15.7
2nd 4,499 / 9,919 10.9 / 35.7
3rd 3,729 / 8,221 18.5 / 60.7
4th 3,184 / 7,020 25.0 / 82.0

Warning
Winches are not to be used for the lifting or moving of persons.
The rated line pull shown is based on the first layer of rope on the drum.
The rope winding on the drum shall remain 10 wraps from the drum.

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a stipulate period from date of purchase.
*Automotive Winch: Limited lifetime warranty for mechanical components, 
                                New Seal Gen2 Series winch a three (3) years warranty for electrical components,
WIRE/SYNTHETIC ROPES ARE NOT INCLUDED UNDER WARRANTY.